Synflex
High PressureSeries 3R80
Working pressure. 2,000 to 5,000 psi

Nylon core tube, synthetic fiber reinforcement, polyurethane cover.
Meets or exceeds SAE Specification

Temperature range.
Suitable for continuous service at temperatures from -40' F to -200'F (-40 C to +93 C), intermittent service +250'F (121'C),with no after-curing of thermoplastics at recommended elevated temperatures.

Chemical resistance
. With the great majority of commonly used chemicals. Synflex Series 3R80 Hose shows excellent resistance to attack and premature aging.

Low elongation.
Elongation at working pressures is only t2%. This enables you
to cut hose to closer lengths without guessing at elongation allowances,
Couplings and accessories. A full line of Synflex couplings, fittings, and tools is available for Synflex 3R80 Hose from 3116" to 1 " 1. DD.
Medium-High Pressure Series 3130
Working pressure: I,000 to 3,000 psi.

Nylon-fined core tube, synthetic
fiber braid, polyurethane cover. Meets or exceeds SAE Specification 10OR7.

Broad temperature range.
Hose is suitable for continuous service at temperatures from - 40'F (- 40'C) to + 200'F (93'C). Intermittent service +250'F (121'C). Synflex thermoplastic materials do not after-cure in service.

Oil-resistant.
Thermoplastic core tube
is resistant to practically all oils and hydraulic fluids. It will not swell nor
absorb fluids which can cause restriction of the 1.D., or release contaminants into the systern.

Low elongation.
At working pressure, elongation is only ± 2%. This low, fully predictable factor enables you to cut
hose to accurate lengths, without guesswork.